Gutter Installation Instructions

Congratulations on choosing TruGuard gutter protection products. The following information will equip you to install a professional gutter protection system on most homes. Of course every home is unique and many homes will require field modification. If you learn the basic guidelines for installation, you will be able to make the adjustments needed to achieve a proper, custom fit on any home.

Video

These video clips show how installation should be done. Just click on the still picture to view the segment. Remember if you have any further questions, just contact us.

Microsoft® Windows Media® Player is required to view the following videos. You can click here to download it.

Before Starting
		Inspect the jobsite and plan in advance. Have all parts and accessories on hand before you begin.
Safety
		Think safety first. Working safely will in the long run increase the speed with which you complete the job.
Tools
		The basics include drill, ladder, tin snips, putty knife, tape measure, pencil and siding break.
Best Performance
		This product is designed to be a closed system with panels that maintain a downward slope with the outward-most point extending past the front edge of the gutter – "NOSE FORWARD."
Gutter Preparation
		Blow off all leaves and debris from roof. Clean the gutters and make sure downspouts are free of debris.
Brackets
		Start installation at the end of a gutter run by installing a Gutter Protection Bracket.
Standard Install
		The standard install includes the bracket, panel, universal end-cap and screws to fasten.
End Caps
		End caps must fit snuggly with no gaps.
Brake Install
		Brake Installs insure proper slope on roofs greater than 5/12 by forming a custom bend on the upstream edge with a siding break.
Roof Strap Hanger Install
		Roof Strap Hanger Install with flashing and double bend demonstrated.
Inside Valley
		Valley Ports and Diverters can control high volume flow in valleys.
Upper to Lower Channels
		Upper to lower downspouts and valley can concentrate water into one area that needs special attention to minimize the amount of water that could over flow.
Outside Corner
		Right to left installation on outside corners demonstrated.
Specialty Installs
		Installing Slanted Fascia